Saturday, November 16, 2013

FEA Analysis

We were able to run the FEA analysis on our model so now we know what we need to change to make the model more suited to the pressure. This analysis is run at 50psi pressure from all sides. 



Friday, October 18, 2013

Calculations of bending of light

I calculated (theta')1 maximum value in Lexan to Air. It helped me to calculate the max value of angle from which light is going to enter Lexan from water medium. I worked backwards when I got the theta' 1 and 2 values 39.2 and 86.92 respectively.
As theta 2 = theta' 1. Use theta 2=39.2 degrees to calculate theta 1(angle between water and lexan medium). We get theta 1 value as 46.85 degrees and it is the max value at which light will enter.

Scan lens Optics

Scan Lens
Sample images of scanner performance

I tried to take the scanner lens apart but I couldn't. I can take the whole case out but not just the lenses because it is a tight fit. The lens case has two lenses in it with different magnification and focal length. This is an estimation because when I touched the surface one is more bulged out than the other lens. I can't find it's focal length until I take them out and test them. I am going to try another way to find out the specifications of the lenses. They are made for specific scanners. The lenses Nathaniel gave me have same focal length and will not fit in that case as they are big to fit inside. But if we have to put extra lens to adjust the focal length we can always build a new case for it.

Good news:
I have got some values of refractive index and how light will bend for different materials and will do the calculations right away if I get the focal length of these length. I also figured out that if we make the box vacuum or leave the air inside it won't affect the properties of bending of light as vacuum and Air has almost same refractive index which is 1. 

Refractive indices:
Air at STP - 1.000277
Air at 0 °C and 1 atm - 1.000293
Vacuum - 1
Water - 1.33
Lexan (poly-carbonate) - (1.584–1.586)

So, it will not affect much as I will count refractive index value till 3 significant digits.
I just need an idea to take the lens out of that case. I did research on it but couldn't find any video or article on it. 

Progress on Model

Here is the main design so far. I would like to make the handles hollow with holes in them to lighten the weight of it though. This is if we have buttons. I placed them toward the right side so you can easily push at least the one on the very edge while holding onto the handle.
The bottom will have a lexan window where you align the scan bed. 
Inside there is an adjustable plate that will tighten down on the back of the scanner. 


Sliding wedges can be tightened down into place to hold the scanner centered on the window. 

All the electronics will fit neatly into the lid. 

Sunday, October 6, 2013

One Button Scan Test

I tried to set up the HP Scanjet G4050 for a one button scan using the button on the lid, but it wasn't entirely just one button. After I pushed the button I got a prompt on my computer with a dialog box that I could change settings on, or simply push scan. The other thing is that when it's done scanning there is another dialog box that asks if you want to scan again or if you are done. Not as hands off the computer as I was expecting it to be.


Friday, October 4, 2013

Windows 8 Tablet

So I took the scanner to Milwaukee PC and was able to get it working perfectly on the Windows 8 tablet they have. The interface was the same as on my Windows 7 laptop. It currently requires a few steps to get there, but I'm sure we could set the defaults how we want them and set the import location so that it is a much simpler process. Maybe we could write a script to turn it into a one-button scan?
Here is the beautiful image at 600 dpi. It was very fast, so I'm sure you would have no trouble with higher resolution if you wanted it. Also the tablet we were looking at had an internal memory of 60GB, so if you didn't want to worry about the sd card you could just save to the tablet.