Sunday, December 1, 2013
Saturday, November 16, 2013
FEA Analysis
We were able to run the FEA analysis on our model so now we know what we need to change to make the model more suited to the pressure. This analysis is run at 50psi pressure from all sides.
Friday, November 1, 2013
Friday, October 18, 2013
Calculations of bending of light
I calculated (theta')1 maximum value in Lexan to Air. It helped me to calculate the max value of angle from which light is going to enter Lexan from water medium. I worked backwards when I got the theta' 1 and 2 values 39.2 and 86.92 respectively.
As theta 2 = theta' 1. Use theta 2=39.2 degrees to calculate theta 1(angle between water and lexan medium). We get theta 1 value as 46.85 degrees and it is the max value at which light will enter.
As theta 2 = theta' 1. Use theta 2=39.2 degrees to calculate theta 1(angle between water and lexan medium). We get theta 1 value as 46.85 degrees and it is the max value at which light will enter.
Scan lens Optics
Scan Lens
Sample images of scanner performance
I tried to take the scanner lens apart but I couldn't. I can take the whole case out but not just the lenses because it is a tight fit. The lens case has two lenses in it with different magnification and focal length. This is an estimation because when I touched the surface one is more bulged out than the other lens. I can't find it's focal length until I take them out and test them. I am going to try another way to find out the specifications of the lenses. They are made for specific scanners. The lenses Nathaniel gave me have same focal length and will not fit in that case as they are big to fit inside. But if we have to put extra lens to adjust the focal length we can always build a new case for it.
Good news:
I have got some values of refractive index and how light will bend for different materials and will do the calculations right away if I get the focal length of these length. I also figured out that if we make the box vacuum or leave the air inside it won't affect the properties of bending of light as vacuum and Air has almost same refractive index which is 1.
Refractive indices:
Air at STP - 1.000277
Air at 0 °C and 1 atm - 1.000293
Vacuum - 1
Water - 1.33
Lexan (poly-carbonate) - (1.584–1.586)
So, it will not affect much as I will count refractive index value till 3 significant digits.
I just need an idea to take the lens out of that case. I did research on it but couldn't find any video or article on it.
Sample images of scanner performance
I tried to take the scanner lens apart but I couldn't. I can take the whole case out but not just the lenses because it is a tight fit. The lens case has two lenses in it with different magnification and focal length. This is an estimation because when I touched the surface one is more bulged out than the other lens. I can't find it's focal length until I take them out and test them. I am going to try another way to find out the specifications of the lenses. They are made for specific scanners. The lenses Nathaniel gave me have same focal length and will not fit in that case as they are big to fit inside. But if we have to put extra lens to adjust the focal length we can always build a new case for it.
Good news:
I have got some values of refractive index and how light will bend for different materials and will do the calculations right away if I get the focal length of these length. I also figured out that if we make the box vacuum or leave the air inside it won't affect the properties of bending of light as vacuum and Air has almost same refractive index which is 1.
Refractive indices:
Air at STP - 1.000277
Air at 0 °C and 1 atm - 1.000293
Vacuum - 1
Water - 1.33
Lexan (poly-carbonate) - (1.584–1.586)
So, it will not affect much as I will count refractive index value till 3 significant digits.
I just need an idea to take the lens out of that case. I did research on it but couldn't find any video or article on it.
Progress on Model
Here is the main design so far. I would like to make the handles hollow with holes in them to lighten the weight of it though. This is if we have buttons. I placed them toward the right side so you can easily push at least the one on the very edge while holding onto the handle.
The bottom will have a lexan window where you align the scan bed.
Inside there is an adjustable plate that will tighten down on the back of the scanner.
Sliding wedges can be tightened down into place to hold the scanner centered on the window.
All the electronics will fit neatly into the lid.
Sunday, October 6, 2013
One Button Scan Test
I tried to set up the HP Scanjet G4050 for a one button scan using the button on the lid, but it wasn't entirely just one button. After I pushed the button I got a prompt on my computer with a dialog box that I could change settings on, or simply push scan. The other thing is that when it's done scanning there is another dialog box that asks if you want to scan again or if you are done. Not as hands off the computer as I was expecting it to be.
Friday, October 4, 2013
Windows 8 Tablet
So I took the scanner to Milwaukee PC and was able to get it working perfectly on the Windows 8 tablet they have. The interface was the same as on my Windows 7 laptop. It currently requires a few steps to get there, but I'm sure we could set the defaults how we want them and set the import location so that it is a much simpler process. Maybe we could write a script to turn it into a one-button scan?
Here is the beautiful image at 600 dpi. It was very fast, so I'm sure you would have no trouble with higher resolution if you wanted it. Also the tablet we were looking at had an internal memory of 60GB, so if you didn't want to worry about the sd card you could just save to the tablet.
Here is the beautiful image at 600 dpi. It was very fast, so I'm sure you would have no trouble with higher resolution if you wanted it. Also the tablet we were looking at had an internal memory of 60GB, so if you didn't want to worry about the sd card you could just save to the tablet.
Saturday, September 28, 2013
Tablets and More....
We tried to get the scanners working with the tablet, but we couldn't do it. One app worked with the scanner, but didn't get good scans and the setting weren't adjustable. When we tried to change them, it just stop saving the scans. The first scans we got had high contrast and no detail. They were not good. We also tried a bunch of different apps, but they didn't interface with the scanners. I chatted online with a HP representative, but she was not helpful at all and just said that this scanner was not supported for scanning from a tablet. We know that this is not entirely true, because we did get scans from the tablet.
We thought about installing drivers, but they don't make drivers for android. They do however make them for Windows 8. Maybe we should go with a Windows 8 tablet. Here are directions from HP on how to scan with a Windows 8 tablet.
We then went over to Milwuakee PC to check out the Windows 8 tablets that they had there and see if we could get one to work with our scanner. The guy there was really helpful and tried to get the tablet connected to the scanner, but didn't have the correct cables in store. He was quite confident that it would work once we got the cabling correct because our scanner has a driver for Windows 8. He said if we got the correct cable we could go in there and test it out. The cable we need would be Micro B to regular B usb cable.
Saturday, August 10, 2013
Iphone waterproof case
Iphone Waterproof Case
They interface with the touchscreen through buttons. This is rated to 110ft or 30m.
They interface with the touchscreen through buttons. This is rated to 110ft or 30m.
Subscribe to:
Posts (Atom)


